Will It Fit? Furniture Doorway & Stairs Calculator
Decor Copilot

Will It Fit? Furniture Move-In Simulator

Check whether a sofa, mattress, or dresser will clear your doorway, hallway turn, and stair landing before you buy.

Furniture Dimensions

in
in
in

Doorway

in
in

Tip: removing the door from its hinges typically buys you 1.5–2" of extra clearance.

Hallway

in

Room & Stairs

in

Verdict

Won't Fit

At least one checkpoint blocks the move. See suggested workarounds below.

Checkpoint Breakdown

Doorway

Smallest cross-section (36.0") cannot fit through the 32.0" opening.

Hallway (Straight)

Hallway is too narrow for the smallest cross-section (36.0").

Hallway Turn

No turn to navigate.

Ceiling Height

Ceiling clearance OK (12" overhead when standing upright).

Stair Landing

No stairs to navigate.

Workarounds & Recommendations

  • Remove the door from its hinges to gain 1.5–2" of width.
  • Check if the piece can be disassembled (legs, cushions, back).

Visualize the new furniture in the actual room before you buy

Upload a photo of the room and try different styles, colors, and layouts — see how the new piece will look in the space before you commit to the purchase or schedule the move.

Try Decor Copilot free

Pro Tips for Tight Move-Ins

  • Measure all three furniture dimensions (W × D × H) and the smallest opening in the route — that's the dimension that decides the move.
  • Removing the door from its hinges typically buys you 1.5–2" of width. Pop the hinge pins from the bottom up.
  • For 90° hallway turns, the longest dimension of the piece must fit diagonally — not just down the hall. Use the "pivot" check above.
  • Stair landings are the #1 reason delivery crews refuse moves. Check both the landing depth and width before purchase.
  • If a sofa won't fit, look for "apartment-sized" or "split-back" models that ship in pieces and assemble in the room.
  • Pad door frames and corner walls with moving blankets before any tight squeeze — drywall repair costs more than prevention.

Frequently Asked Questions

How do I know if my couch will fit through the door?

Measure the door opening between the stops, then the couch height, depth, and diagonal depth. If the depth or height is less than the door width, it fits straight or on its side; if the diagonal depth is less than the door width, it can be tilted through.

How do I measure the diagonal depth of a sofa?

Lay a straight edge from the top of the back to the front edge of the arm, then measure from the bottom rear corner of the sofa up to where it meets the straight edge at a right angle. That number is the smallest profile the sofa has when tilted back.

What is the standard width of a door?

Interior doors are usually 28–32 in wide and front doors 36 in wide, but the clear opening is about 1.5–2 in narrower once the door and stops are accounted for. Taking the door off its hinges gains back roughly 1–2 in.

Will my furniture fit around a hallway corner?

Long pieces need to pivot at the corner, so both the hallway width and the ceiling height matter. If the piece is too long to turn flat, standing it on end can work when the ceiling is higher than the piece is long.

What should I measure on stairs before delivery?

Measure the stair width, the lowest ceiling point over the stairs, and the size of any landing or turn. US code minimums are 36 in wide and 6 ft 8 in of headroom, but many older homes are tighter.

What can I do if my furniture will not fit?

Remove the legs, feet, and cushions, take the door off its hinges, or remove a door stop to gain space. For future purchases, choose sofas with removable arms, modular sectionals, or flat-pack pieces.

Related guides

Before
Before
After
After

Unlock the Full Power of Decor Copilot

Upload a photo and see your room redesigned in seconds. Start for free today.

No credit card required