Insulation R-Value Calculator | Recommended R-Value | Free
Decor Copilot

Insulation R-Value Calculator

Find the recommended insulation R-value for your climate zone and area.

Results

Recommended R-Value

R38–60

Area
Attic / ceiling
Typical Install
About 10–18" of blown fiberglass

Higher R-values save more energy in colder climates. These follow U.S. DOE recommendations — check local code, which may require more.

R-value measures how well insulation resists heat flow — higher is better. The right target depends on your climate zone and where you’re insulating. Pick both to get the DOE-recommended R-value.

Pro Tips

  • Attics give the biggest energy payback — insulate them first.
  • R-value adds up: layering more insulation increases the total R-value.
  • Air-seal gaps and bypasses before adding insulation for best results.
  • Don’t compress batts — squashed insulation loses R-value.

Frequently Asked Questions

What R-value insulation do I need for my attic?

For most U.S. climates the DOE recommends roughly R38–R60 in the attic — more in colder zones. That’s about 10–18 inches of blown fiberglass or cellulose.

What R-value for exterior walls?

Typical wall insulation is R13–R15 in 2×4 walls and R19–R21 in deeper 2×6 walls, with higher values recommended in colder climate zones.

Does higher R-value always mean better?

Higher R-value resists heat flow better and saves more energy, especially in cold climates. But returns diminish, and air-sealing matters as much as raw R-value.

Before
Before
After
After

Unlock the Full Power of Decor Copilot

Upload a photo and see your room redesigned in seconds. Start for free today.

No credit card required

Use my photo