Attic Ventilation Calculator | Net Free Area | Free Tool
Decor Copilot

Attic Ventilation Calculator

Calculate the attic ventilation (net free area) your roof needs.

sq ft

Results

Total Net Free Area

576sq in

Intake (soffit) Vents
288sq in
Exhaust (ridge) Vents
288sq in

Split the vent area roughly 50/50 between intake (low, at the soffits) and exhaust (high, at the ridge). Each ventโ€™s packaging lists its net free area.

Proper attic ventilation prevents heat buildup, ice dams, and moisture damage. The standard rule is 1 square foot of net free vent area per 150โ€“300 square feet of attic floor, split evenly between intake and exhaust.

Pro Tips

  • Balance intake and exhaust 50/50 for airflow to actually move.
  • Intake vents go low at the soffits; exhaust vents go high at the ridge.
  • Donโ€™t mix exhaust types (ridge + powered) โ€” they can short-circuit airflow.
  • Keep insulation from blocking soffit vents; use baffles.

Frequently Asked Questions

How much attic ventilation do I need?

The standard is 1 square foot of net free vent area per 150 square feet of attic floor, or per 300 with a vapor barrier and balanced vents. A 1,200 sq ft attic needs about 4โ€“8 sq ft of net free area.

What is net free area for vents?

Net free area (NFA) is the actual open area of a vent after subtracting screens and louvers. Vent packaging lists the NFA so you can add up enough total ventilation.

Should intake and exhaust ventilation be balanced?

Yes โ€” split the total vent area roughly 50/50 between intake (soffit) and exhaust (ridge). Unbalanced systems can pull air from the house instead of the soffits.

Before
Before
After
After

Unlock the Full Power of Decor Copilot

Upload a photo and see your room redesigned in seconds. Start for free today.

No credit card required

Use my photo