LED Strip & Power Supply Calculator
Calculate the wattage and power supply size for an LED strip run.
Results
Total Wattage
70.4W
- Power Supply Size
- 85W+
- Run Limit (12V)
- ~16 ft per run
Size the power supply about 20% larger than the load. For 12V strips, keep runs under ~16 ft (or feed power from both ends) to avoid voltage drop and dimming at the far end.
LED strips need a power supply sized to the run โ too small and theyโll flicker or fail. Enter your strip length and density to get the total wattage and the recommended power supply.
Pro Tips
- Choose a power supply rated about 20% above the total wattage.
- For 12V strips, keep runs under ~16 ft or power from both ends.
- Voltage drop makes long runs dim and warm-shifted at the far end.
- Use an in-line dimmer or smart controller rated for the wattage.
Frequently Asked Questions
What size power supply for LED strip?
Multiply the stripโs watts per foot by the length, then add about 20% headroom. A 16-foot standard strip (~4.4 W/ft โ 70W) needs at least an 84W power supply.
How long can an LED strip run be?
For 12V strips, keep a single run under about 16 feet to avoid voltage drop and dimming. Longer runs need a higher voltage (24V), thicker wire, or power injected from both ends.
How many watts does an LED strip use?
Typical strips draw about 2.4โ9 watts per foot depending on density and brightness. Check the spec, multiply by your length, and size the supply with 20% extra.


Unlock the Full Power of Decor Copilot
Upload a photo and see your room redesigned in seconds. Start for free today.
No credit card required