Drywall Calculator
Calculate drywall sheets, screws, and joint compound for a room.
Results
Drywall Sheets
15
- Total Area
- 416sq ft
- Screws (approx.)
- 480
- Joint Compound
- 2.1gal
Includes 10% waste. Screw and compound figures are estimates — buy a little extra tape, mud, and screws.
Drywall is sold by the sheet, so estimate your wall (and optionally ceiling) area, divide by sheet size, and add waste. This tool also estimates screws and joint compound.
Pro Tips
- Add 10% for waste, plus extra for rooms with lots of openings.
- Hang ceilings first, then walls, so wall sheets support the ceiling edges.
- Use 5/8" drywall on ceilings and for fire-rated walls; 1/2" elsewhere.
- Plan on roughly one box of joint compound per 10–12 sheets for taping and finishing.
Frequently Asked Questions
How many drywall sheets do I need?
Calculate wall area (perimeter × height) plus ceiling if needed, add 10% waste, then divide by sheet size (32 sq ft for 4×8, 48 sq ft for 4×12). A 12 × 14 ft room with 8 ft walls needs about 15 sheets of 4×8.
How many screws per drywall sheet?
Plan on about 32 screws per 4×8 sheet — roughly every 12 inches on studs and 16 inches in the field. Ceilings use a few more per sheet.
How much joint compound do I need?
Estimate about half a gallon of joint compound per 100 square feet of drywall for taping and three finishing coats, plus extra for textured finishes.


Unlock the Full Power of Decor Copilot
Upload a photo and see your room redesigned in seconds. Start for free today.
No credit card required